SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Parts
Used Forklift Parts - Eventually, lift truck components will wear and should be replaced. Obtaining brand new components could become a costly endeavor so one more idea is to buy used lift truck components. This could save much cash in the long run. It is a great idea to acquire used lift truck components that have been reproduced. These parts will ensure that you are getting components which would work for a long time and be productive.
Broken or worn parts that are remanufactured are a very cost effective solution compared to rebuilding. With rebuilding components, just the parts which are worn out or broken get changed, which means that other wearable parts might break down soon after acquisition.
Remanufactured components are cleaned after being taken apart and have the unusable components replaced. This technique can provide the best assurance for second-hand parts. All wearable components are replaced regardless of age or wear which is one more reason why reproduced components overall function so much better. Whatever component within the part is new and this offers far longer life to the used part. Based on the lift truck components which are being redone, the cleaning process and the entire remanufacturing process will differ.
The engines are cleaned after a complete disassembly. Several engine parts like for example pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are another thing that is oven cleaned after being disassembled. The transmission is then pressure washed. A complete examination is done in order to check for any cracks. Bushings, seals and bearings are all replaced. Typically, the replacement parts utilized on transmission parts meet OEM specifications.
Certain parts such as torque converters, the alternator, the water pump, steer axles and the starter could obtain longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could likewise be remanufactured with replacing all aged and worn out parts. Not like other forklift components the control card can only have the worn and aged parts replaced.
Components which are reproduced have to be thoroughly examined upon reassembly to ensure they are in good condition previous to being sold. When buying these components, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain larger parts like steer axles, engines and transmissions, OEM specification replacement components must be used.
The forklift dealer could ensure that the parts they have remanufactured meet the OEM specifications. This would likewise guarantee the parts meet industry standards. Many details go into remanufacturing used parts. This attention to detail offers more serviceability out of remanufactured parts opposed to the components that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Pittsburg, Pennsylvania
forkliftpartspittsburgh.com
Email Us
About Us